1. Low cost and fast operation.

On the basis of fully considering the actual situation of the factory, through the special numerical control interface, complete the seamless connection between the computer and the automatic electronic saw, the backward manual opening mode into the machine automatic command operation, the transformation process is simple and fast. Only need to spend low cost of transformation, can fully transform your factory opening process, enjoy the high benefit brought by high technology. It is necessary for the operator to understand the automatic electronic saw very well, whether it is the structure of the machine, the scope of application or the specification of the skill of the machine and the safety code necessary to abide by when using, it must be done in the heart, to avoid accidents in use. Before the other formal operation, the operator is generally required to carry out an examination, as long as the examination qualified can carry out the operation of the automatic electronic saw.

2. No professional workers, reduce the cost of manpower.

The use of automatic electronic saw before the manual layout plan accounting, instruction input and other key links of the material opening, can not be separated from the skilled host hand, you need to pay thousands of yuan a month workers wages; The key link of electronic sawing is used to complete the computer active operation, the process of opening becomes simple and fast, and the general operation can be competent for the host hand operation. Before the formal start of operation, it is necessary to have a comprehensive view of the automatic electronic saw, to check whether the link bolts of each part of the opening machine are loose, to check whether the transmission device of the opening machine is running smoothly, to check whether the buttons of the opening machine are normal, and to check whether the smooth system of the opening machine, pneumatic system and all kinds of safety systems are missing. When all these have been checked and there is no problem, it can be started up normally.

3. Fine layout, high utilization rate of raw materials.

The use of general saw due to the number of cutting, size completely rely on the human brain accounting, that the error is difficult to avoid, the program is more dependent on the worker's skill, professional level, raw materials often can not be fully used, attack a lot of expectations, and workers rarely recover surplus material, forming a great waste; After the transformation, after calculating the layout plan by computer, the optimal layout of the plate was completed. Later, the bar code skills were used to shadow the remaining materials. The next layout plan gave priority to the previous remaining materials for accounting, and the utilization rate of raw materials was significantly improved. Before the formal processing, the best first active electronic saw empty operation, because as long as the empty operation can more ensure that all parts of the machine are very normal, to ensure safety.

4. The whole process of automatic operation, greatly improve the processing power.

Before the transformation, manual operation needs to calculate the chaotic discharging scheme, and repeatedly input the opening data and opening instructions, which consumes a lot of time and the operation power is low; After the transformation, it becomes a seamless connection between the computer and the active electronic saw. Through the intelligent control software, the discharge plan is directly generated by the software, and the opening parameters are directly transferred to the electronic saw. The production power will be revolutionary improved.

5. No manual input, the machine takes the initiative to command.

Before the transformation of the manual opening process is obviously affected by the nature of workers, working attitude and conditions and other uncertain factors, the error rate is high, forming a huge waste; After the transformation, the whole process of computer initiative command to get rid of the one-sided dependence on workers, greatly improve the accuracy of processing, reduce the error rate. When the active electronic saw is running, it is necessary for the operator to pay attention to his health and safety. Whether it is feeding or unloading, it is necessary to strictly abide by the safety requirements to avoid accidents.