CNC cutting saw boot the correct order, the first we should know to turn the power supply, and then the CNC cutting saw emergency stop button release. In this way, we can accurately ensure that the CNC cutting machine has been prepared before starting up and using.

CNC cutting saw boot before the preparation is ready, and then the machine link computer boot, into the operating system, find and open the software produced by the control equipment.

Check whether the CNC cutting saw system is normal. If the system has any fault information, it can not use the machine for processing, to find out the cause of the fault and maintenance.

Measure whether the size of the workpiece will exceed the CNC cutting machine processing planning, and do a good job of adjustment. If the workpiece volume exceeds the planning of processing, it will affect the work of the equipment, and may lead to the damage of the machine.

Start the pressure equipment of CNC cutting machine, and carry out normal processing after testing without any problems.

The above is the operation of CNC cutting saw boot and requirements, customers in the process of operation and use, it is necessary to strictly according to the requirements of operation and use, each step of the second can not be changed at will, otherwise it is very simple to cause unnecessary problems; Severe in accordance with the second to operate, can better improve the processing power and quality.