There are many factors affecting the quality of the edge banding machine, such as the edge work is interrupted, disturb the determination of time affect the reliability of the application of time, etc. There are several ways to improve the work rate, efficiency and quality of the work:

1. If part of the edge strip and plate edge failed to strong adhesion can be coated with glue repair;

2. If necessary, tear off the edge strip, saw off or mill off the edge from the beginning;

3. When rust spots are found on the plates, wipe the anti-rust oil on the machine in time;

4. Often protect the edge banding machine equipment, especially the coating equipment of the edge banding machine;

5. The cooperation between the process flow and the process (such as the first drilling of the plate or door edge sealing group, etc.), to clear that the cooperation is not good will also have adverse effects;

6. The performance of the edge banding machine (such as track speed), the position and height of the workpiece, the working speed of the workers and the ability to discriminate the fault, and the working cooperation of the workers will affect the normal use of the edge banding machine, so the workers should carry out the necessary training before taking the job, if you want to minimize the impact of interrupted working hours, please try to use skilled workers to operate. The above six points in detail introduced the impact of edge banding machine edge quality solutions.