New band saw log push saw safety device To better avoid the risk of wood bouncing, the circular saw should be equipped with a detached knife (loose tip knife) and a themed activity shield. The effect of separating out the knife is to make the wood continue to separate out, so that the wood log is not easy to close to the rotating knife head and not easy to cause the wood rebound. The effect of the theme cover is to block the saw blade, avoid too much hand close to the saw blade, but also reasonably avoid the wood rebound.

The safety device of large diameter log push saw is generally composed of protective cover reaming drill, separating knife and anti-wood rebound baffle. Adjustable malleable safety shield can make it cut wood specifications and lift, not only easy to feed into the saw, but also can manipulate rice husk ash splash and wood rebound; The cutting edge of the wood chips is expanded by the separated knife to avoid the rebound of the wood caused by the clipping saw and to improve the efficiency of the saw cutting. The excessive noise of circular saw machine immediately endangers the physical and mental health of operators, and should be installed relative silencer equipment.

Each part of the automatic log push table saw is enclosed by a protective cover, except for the part of the work of opening the bottom edge of the saw card guide roll to the middle of the operating table. Saw wheels should be thoroughly enclosed. The outer surface of the saw wheel housing should be monolithic. Saw card and saw wheel cover in the middle of the safety device should cover the saw blade face and both sides, and can be fully automatic adjustment, with the log push table saw saw card elevator. The saw card should adhere to the saw blade gently, rather than tightly stuck, and there should be no jam when rotating the saw blade.