First of all, the machine and work place clean; Secondly, check whether the vacuuming system is normal; Then check whether the push saw blade is sharp; Whether the size saw blade is in a straight line; Test the machine for about one minute to see whether the machine works normally; Finally, the materials and accessories are ready.

Preparation for starting the CNC cutting saw

1. Check if the power switch of the CNC cutting saw is pushed in place and if there is a phase loss in the current to avoid burning the machine motor due to phase loss during machine activation.

2. Clean the machine countertop and workplace. When operating a CNC cutting saw, the person who turns on the machine must stand with their legs straight, body straight, and not prone or leaning against the operating platform.

3. Check whether the CNC cutting saw blade is perpendicular to the sliding table, and whether the large and small saw blades are in the same straight line. Test the machine for about one minute to see if the CNC cutting saw operation is normal.

4. Firstly, push the bed forward several times to check if the slide is smooth and to keep it clean and smooth.

5. Prepare materials and accessories.

CNC panel saws have the characteristics of simple operation, stability, safety, and efficiency, and are essential equipment for the mass production, standardization, mechanization, and specialization of furniture.   CNC panel saws produced abroad and in Shenyang have more adaptability and stability in application, and their accuracy meets the cutting requirements of solid wood and composite boards.