1. The dust removal system of many first-line electronic cutting saw manufacturers is still appropriate and good, which can deal with the dust removal problem of electronic cutting saw at the root, so it should not be covet for cheap after all, so strict environmental inspection should not be caused by equipment environmental unqualified to bring unnecessary trouble to the company. Selecting advanced electronic cutting saw with daily dust removal method is the foundation.

2. Economic conditions allow, can choose the above mentioned cloth bag dust collector, woodworking dust collector has simple structure, compact, low power consumption, dust collector box equipped with explosion-proof valve or explosion-proof door, because the dust factory furniture factory and other dust points are mainly wood chips, light dust proportion, need to choose relatively large wind pressure fan and wood fiber density small wear on equipment, Therefore, the general selection of positive pressure bag dust collector, and the dust bag with anti-static dust bag, so the proportion of light fiber dust, such as sawdust, wood shavings, asbestos powder, tobacco and so on has a higher capturing capacity. Single machine bag dust collector is mainly used for single woodworking machinery dust removal, has the characteristics of flexibility and convenience.

3. Workers should be strictly required to wear dust masks and glasses in daily operations, the dust of electronic cutting saw is inevitable, for the sake of health, operators should wear protective glasses and dust masks, in order to protect the eyes and respiratory organs, especially in the production of fine wood dust on the machine tools, workers should wear large masks, to prevent dust damage. And in daily operations, we should also do a good job of cleaning the surface of the machine table and the shell. After all, once the dust enters the inside of the equipment, it will constitute a very big trouble for the equipment, affecting the normal use of the equipment and affecting the production power.

4. Now the vast majority of electronic cutting saws are equipped with dust vacuuming equipment, but they do not deal with the problem of dust, the reason is that under the conditions at that time, the useful way of electronic cutting saw dust removal is still to select suitable dust removal equipment. The selection of electronic cutting saw dust removal equipment should consider the purification degree required by the operation site and the nature of dust. Large and medium sized wood dust can be collected on site in time, and for all kinds of damaged fine wood dust, the traditional useful way of electronic cutting saw dust removal is to choose pneumatic dust collection equipment or cloth bag dust collection equipment to collect.

The system dust center bag dust collector is used for the dust removal operation of the whole production line of carpenter machinery. It has the characteristics of economy, usefulness, aesthetics and so on. It does not affect the production operation, but also can reach the dust removal effect of ambition. Electronic cutting saw dust removal is mainly based on reasonable equipment deployment, daily dust prevention, dust removal method is auxiliary, there is no shortcut.