Automatic edging machine is a special equipment for woodworking edge sealing, is widely used in wood cabinets, wood tables and chairs and other wood furniture edge sealing work. Only the correct operation of automatic edge banding machine can produce high quality products. In order to improve product quality and prevent several problems, the following five requirements are put forward for the operation of automatic edge banding machine:

1. Guide rail: Check whether the guide rail is smooth before installation, both ends of the guide rail should be in line, and be quenched.

2. Machining: The outsourced parts will be returned if they are not processed according to the drawings and will be lost by the outsourced manufacturers. As for the parts processed in the factory, if they are not processed according to the drawings, the equipment owner has the right to return them to be processed from scratch. In case it cannot be reprocessed, the party concerned shall compensate for all materials and labor costs.

3. Bearings: imported bearings will be selected for the rubber pot part and the pulley part. Be careful not to confuse the installation, and the installation of bearings must be in accordance with the installation process.

4. Conveyor belt motor: do not knock hard when installing, otherwise it will break the device in the reducer.

When using automatic edge banding machine, we must do a good job of checking the problem. The parts of automatic edge banding machine should be closely combined with the retaining. Tearing test should be done to carefully check whether the combination is not tight. In the process of operation to prevent scratches and severe wear, in order to ensure the quality of the edge, the press roll to ensure clean, edge after the objects are not allowed to have traces. The correct operation of automatic edge banding machine is to ensure the quality of its products and work efficiency, and is also one of the important links to extend the service life of automatic edge banding machine.