1. The optimal saw-feeding conveyor belt skew 30 degrees, so that the wood automatically leans towards the guide plate datum level, different widths of wood may be used in a mixed manner, 30 degrees skew of wood makes the wood center of gravity gather to the side, conducive to the stability of high-speed conveyor belt transportation.

2. The diameter of the feed wheel under the optimized saw-cutting saw is large, and the surface of the wheel is specially hardened, which is not easy to wear. In addition, the upper pressing wheel is rubber, which can tightly clamp the wood sent by the wheel.

3. There are two groups of press wheels before and after the saw blade cutting saw, together with short material pressing equipment, to ensure the precision of cutting saw.

4. Cutting saw table of 6 (5) under the fixed height of the feed wheel, with internal teeth when the gauge belt movement, can also ensure that the length of the saw accuracy to maintain within 1MM.

5. The action of sawing material can be equipped with optional equipment,AC servo motor CNC control, fast action (cylinder sawing material action is about 0.4 seconds/time, servo motor action is only 0.2 seconds/time), easy to adjust, less wear. It mainly saves about 70% compressed air than cylinder operation.

6. The high speed cutting saw of the saw seat. For waste, small material directly with compressed air is very simple from the skew surface quickly blown off the saw table. Simple and sophisticated mechanical action (without complex inductor and pneumatic mechanical action) will not be affected by poor mechanism adjustment or pneumatic action adjustment, is the PAUL machine efficient important essence characteristic.

7. Simple sophisticated mechanism and action on behalf of its future maintenance and repair is also simple.

8. After the discharging wheel conveyor belt classification push, using 440MM wide push plate, to ensure the accurate positioning of the position.

9. PAUL has good experience in wood utilization, computer software and organization.